NonDestructive Testing (NDT)

Inspection Point Plugs + TML Labels

Nondestructive Testing (NDT) Inspection Plugs

Designed for OSHA and EPA inspection for corrosion under insulation (CUI) on storage vessels, tanks, and pipelines in power generation, processing and refining operations.

NDTspek’s Inspection Plugs consists of an elastomer (EPDM) sleeve with metal cap, handle, lanyard, and locking ring as standard.

The plug sleeve is available in either EPDM (ethylene propylene) or optional Silicone for higher temperature applications.

Metal caps are available in #5052 aluminum or #304 stainless steel.

Installed for Bio, Chemical, Cold Storage, Pharma, Steam, Oil & Gas, Nuclear, LNG, and Petrochem facilities, tanks, and pipelines.

NDT Inspection Plugs for Non Destructive testing (NDT) inspection and evaluation (NDE) of mechanical integrity + corrosion.

Inspection Plugs are designed for repeat access for NDT inspection of insulated pipes, tanks and vessels.

Once installed, the inspection plug seals the NDT access point with a metal (aluminum or stainless) cap and EPDM elastomer (or silicone) sleeve, creating a moisture-proof barrier.

The barrier protects against corrosion under the insulation (CUI), plus chemical and UV exposure of the elastomer or silicone sleeve.

NDT Inspection Plugs
Installed Inspection Plugs

Diameters: 1.5″ | 2.5″ | 3.0″ | 5.0″ (38, 64, 76, 127 mm)

    • CUI inspection point access for Nondestructive testing EPA & OSHA inspection.
    • NDT Inspection Plugs can be installed on smooth and corrugated insulated jacketing.

NDT Inspection Access Point Labels

    • TML / UT Access Point Labels
      ID testing of testing access point locations.
      250) labels per roll.
    • Acrylic adhesive requires 48-72 hours to achieve 90% of its ultimate bond strength.
TML / UT Point Labels

This shortcode has been expired. Please contact with the site admin.